Every woman knows what it is like to try to find a bra that fits perfectly. Even though there are millions of styles and designs, women still have a hard time finding the ideal bra. Many women will find a bra style they like and stick with the same bra throughout the years. But there are times when one particular style or fit will no longer be suitable. For instance, weight loss and gain and, of course, pregnancy and nursing are factors in how a bra fits. Learning make your own bras is a great answer to this age-old problem. There are many ways to make your own bra. You can make a pattern, buy a pattern, or you can even use an old bra as a pattern. Making a bra is actually easier than it sounds. Here is a very simple method.
Instructions
1. Lay the fabric on a table or other smooth surface. A flat surface provides easier cutting.
2. Place the pattern on the fabric and pin it down.
3. Cut along the outer edge of the pattern. Remove the pins and pattern pieces.
4. Fold the cut-out pieces in half and place two pins in the fabric, one near the bottom and one near the middle of the fold. Starting at the bottom, about ½ inch from the fold, sew a diagonal seam ending at the middle of the fabric. Repeat on the other piece. These are the darts.
5. Turn the fabric to the wrong side or what will be the inside of the bra. Make a narrow fold on the sides of the material. Pin the lace to the material and sew the lace to the fold. Repeat on the other piece.
6. Thread your needle and tie a knot at the end. Make gathers in the middle bottom of the fabric cups by starting near the outer edge of one side. Make gentle, loose folds and place the needle through the folds. When you are near the other edge stop, and using your fingers, gather the fabric. Tie off the thread. Repeat on the other piece.
7. Pin the cups to the wide lace. Sew the cups to the top of the wide lace.
8. Make a loop from the wide lace. Measure the wide lace two inches bigger than your bra size. Cut the wide lace. Bring the ends together and sew together two inches from the edge. Trim the excess material. Open seam and sew along each edge to tack down.
9. Measure the straps. You can use an old bra to find that measurement. Slide the adjusters on the straps according to the instructions on the package. Sew one side to the top of the cup and the other side to the back of the wide lace. Repeat with the other strap.
Tags: wide lace, other piece, Repeat other, Repeat other piece, cups wide, cups wide lace
